PTJ Develops New Surface Plating Process For PEEK Material
In order to meet the special needs of customers for PEEK performance, the company recently developed the PEEK surface plating process. The process can be divided into: chemical plating and electroplating. At present, the metal coatings on the PEEK surface that can be used for electroplating are: gold, silver, copper , Nickel, chromium.
Because PEEK high-performance special engineering plastic has good insulation properties, the surface resistance value of PEEK can reach 103 ohms through the composite modification process, and the surface resistance of PEEK can reach tens of ohms through the Machining PEEK surface coating process, which can better Meet customers’ demand for PEEK applications under harsh conditions. In particular, it can meet some special industry applications that require electrical conductivity, dielectric strength, and signal shielding.
At present, the thickness of the electroplated coating on our PEEK surface can be 0.03-0.013mm, the chemical plating on the PEEK surface is uniform, the adhesion is strong, the conductivity can reach 100%, and the neutral salt spray test can reach 12000 hours.
Link to this article： PTJ Develops New Surface Plating Process For PEEK Material
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:https://www.cncmachiningptj.com/，thanks！