Environmental temperature and humidity requirements for CNC machining in Dongguan

Environmental temperature and humidity requirements. CNC lathes processed by Dongguan CNC generally require a constant temperature of the environment to ensure the accuracy of the CNC machine tools, and generally require a constant temperature of about 20 degrees Celsius. A lot of practice has proved that during the high temperature period in summer, the failure rate of the CNC system greatly increases, and it is easy to cause collision accidents.

Humid environment will also reduce the reliability of CNC lathe operation, so we should take dehumidification measures in the CNC lathe environment to avoid circuit short circuit, causing CNC system misoperation and collision accidents.

At the same time, CNC lathes are also required to be far away from vibration sources such as forging equipment, electromagnetic field interference, electric welding machines, wire-cutting machine tools, electric discharge machine tools and other electrical processing machine tools.
Develop standardized debugging actions, mainly including the following points:
1) According to the Dongguan CNC machining manufacturer, when debugging the program, the G00 speed selection switch must be set to the F0 gear to allow the tool to approach the workpiece at a slower speed. Otherwise, once the tool offset is wrong, the tool will go from the tool change point in G00 mode. When moving quickly to the feed point, there may be a strong collision with the workpiece, leaving the operator at a loss and too late to eliminate the danger; on the contrary, when the tool is approached at a slower speed, even if the tool deviation is wrong, the operator has plenty of money. Time to adjust.
2) When debugging the program, the Dongguan CNC processing manufacturer introduced that the CNC lathe must be in a single-step execution state. After the operator executes the previous block on the CNC lathe, he must check the correctness and rationality of the next block again, and make adjustments accordingly.