Dongguan CNC machining operation machining center

Dongguan CNC machining operation machining center

1. The manufacturer of the processing center said that after entering the processing center, it must abide by the safety operation regulations of the processing center.

2. Before work, you should wear protective equipment, tie up your cuffs, and are not allowed to wear scarves, gloves, ties, or aprons. Female workers should wear their hair braids in their hats.

3. Check whether the tool compensation, machine zero point, workpiece zero point, etc. are correct before starting up.

4. The relative position of each button should meet the operating requirements. Carefully compile and enter the numerical control program.

5. According to the Dongguan CNC processing manufacturer, it is necessary to check the operation status of the protection, insurance, signal, position, mechanical transmission part, electrical, hydraulic, digital Display and other systems on the equipment. Cutting processing can be carried out under all normal conditions.

6. For the trial operation of the front machine tool of Dongguan CNC machining, the operating conditions of the lubrication, mechanical, electrical, hydraulic, digital Display and other systems should be checked, and cutting can be carried out under all normal conditions.

7. After the machine tool enters the processing operation according to the program, the operator is not allowed to touch the moving workpiece, tool and transmission part, and it is forbidden to pass or take tools and other items through the rotating part of the machine tool.

8. When adjusting the machine tool, clamping workpieces and tools, and wiping the machine tool, the machine must be stopped.

9. Tools or other items processed by Dongguan CNC are not allowed to be placed on electrical appliances, operation cabinets and protective covers.

10. It is not allowed to directly remove iron filings by hand, and special tools should be used to clean it.

11. If abnormal conditions and alarm signals are found, stop immediately and ask relevant personnel to check.